Institutional Research Director, Universidad Panamericana
Calzada Circ. Pte. 49, Col. Ciudad Granja, Zapopan, Jalisco, Mexico, C.P. 45010.
amendoza@up.edu.mx. Tel: +52 (33) 1368-2200 Ext. 3126.
National Researcher Level 1 (SNI-CONACYT, Mexico).
Research Areas
Inventory Theory, Supply Chain Optimisation, Transportation, Facility Planning and Design, Production Planning (Scheduling), Operations Management in the Healthcare Sector.
Professional Memberships
- Founding Member (2012) and Vice President of International Affairs (2015-present) of the Mexican Association of Logistics and Supply Chain, A.C. (http://aml.org.mx/consejo-directivo/).
- Member of:
- Institute of Industrial Engineers – IIE (since 2000)
- Institute for Operations Research and the Management Sciences – INFORMS (since 2003)
- International Supply Chain Education Alliance – ISCEA (since 2010).
Academic Background
Degrees:
– Ph.D. in Industrial Engineering and Operations Research
The Pennsylvania State University, 2007.
Thesis Title: “Effective Methodologies for Supplier Selection and Order Quantity Allocation”.
– Master of Science in Industrial Engineering and Operations Research
The Pennsylvania State University, 2003.
Thesis Title: “Single-Stage Inventory Models with Two Transportation Modes and Quantity Discounts”.
– Bachelor’s Degree in Industrial Engineering
Universidad Panamericana, 2000.
Graduated Magna Cum Laude.
Research Stays
– Research Stay at the Harold and Inge Marcus Department of Industrial and Manufacturing Engineering, The Pennsylvania State University, Summer 2018.
– Research Stay at the Department of Information, Risk & Operations Management, University of Texas at Austin, Summer 2014.
Other Programs
– Innovation for Senior Management, 2014, Panamerican Institute of High Business Management (IPADE).
– Exchange Program at the University of Regina, Canada. Completed the eighth semester of the Bachelor’s degree in Industrial Engineering. January-July 1999.
Articles in indexed journals
1. Nucamendi, S., Moreno, M. A., Mendoza, A., 2018, “A Methodology for Increasing Revenue in Fashion
Retail Industry: a Case Study of a Mexican Company”. Aceptado en International Journal of Retail &
Distribution Management (20 julio 2018). https://doi.org/10.1108/IJRDM-08-2017-0159 (Indexado en JCR,
Scopus).
2. Nambirajan, R., Mendoza, A., Pazhani, S., Narendran, T. y Ganesh, K., 2016, “CARE: Heuristics for TwoStage Multi-Product Inventory Routing Problems with Replenishments”. Computers & Industrial
Engineering, 97, pp. 41-57. (ISSN: 0360-8352). https://dx.doi.org/10.1016/j.cie.2016.04.004 (Indexado en
JCR, Scopus).
3. Pazhani, S., Ventura, J. A. y Mendoza, A., 2016, “A Serial Inventory System with Supplier Selection and
Order Quantity Allocation considering Transportation Costs”, Applied Mathematical Modelling, 40(1), pp.
612-634. (ISSN: 0307-904x). http://dx.doi.org/10.1016/j.apm.2015.06.008 (Indexado en JCR, Scopus).
4. Ventura, J. A., Subramanian, P. y Mendoza, A., 2015, “Finding Optimal Dwell Points for Automated Guided
Vehicles in General Guide-Path Layouts”, International Journal of Production Economics, 170(Part C), pp.
850-861. (ISSN: 0925-5273). http://dx.doi.org/10.1016/j.ijpe.2015.03.007 (Indexado en JCR, Scopus).
5. López, J. A., Mendoza, A. y Masini-Aguilera, J., 2013, “A Classic and Effective Approach to Inventory
Management”, International Journal of Industrial Engineering, 20(3-4), pp. 373-384. (ISSN: 1943-670X).
http://journals.sfu.ca/ijietap/index.php/ijie/article/view/460 (Indexado en JCR, Scopus).
6. Ablanedo, J. H., Ruiz-Torres, A. y Mendoza, A., 2013, “A Model for Supply Chain Planning: Supplier
Selection and Quantity Allocation in the Case of a Fixed Lot Size (Modelo para la Planificación en la Cadena
de Suministro: Selección y Asignación a Proveedores en el Caso de Lotes Fijos”, Ingeniería y Desarrollo,
31(1), pp. 1-21. (ISSN impreso:0122-3461, 2145-9371 online). http://ref.scielo.org/yzmmvf (Indexado en
Scielo, Redalyc, Latindex).
7. Mendoza, A. y Ventura, J. A., 2013, “Modeling Actual Transportation Costs in Supplier Selection and
Order Quantity Allocation”, Operational Research: An International Journal, 13(1), pp. 5-25. (ISSN:
1109-2858 print version, ISSN: 1866-1505 electronic version). http://dx.doi.org/10.1007/
s12351-011-0109-3 (Indexado en Scopus).
8. Mendoza, A. y Ventura, J. A., 2012, “Analytical Models for Supplier Selection and Order Quantity
Allocation”, Applied Mathematical Modelling, 36(8), pp. 3826-3835. (ISSN: 0307-904x). http://dx.doi.org/
10.1016/j.apm.2011.11.025 (Indexado en JCR, Scopus).
9. Mendoza, A. y Ventura, J. A., 2010, “A Serial Inventory System with Supplier Selection and Order Quantity
Allocation”, European Journal of Operational Research, 207(3), pp. 1304-1315. (ISSN:0377-2217). http://
dx.doi.org/10.1016/j.ejor.2010.06.034 (Indexado en JCR, Scopus).
10. Mendoza, A. y Ventura, J. A., 2009, “Estimating freight rates in inventory replenishment and supplier
selection decisions,” Logistics Research, 1(3-4), pp. 185-196. (ISSN: 1865-035X). http://dx.doi.org//
10.1007/s12159-009-0018-5 (Indexado en Scopus).
11. Mendoza, A., Santiago, E. y Ravindran, R. A., 2008, “A Three-Phase Multicriteria Method to the Supplier
Selection Problem”, International Journal of Industrial Engineering, 15(2), pp. 195-210. (ISSN: 1943-670X).
(Indexado en JCR, Scopus).
12. Mendoza, A. y Ventura, J. A., 2008, “An Effective Method to Supplier Selection and Order Quantity
Allocation”, International Journal of Business and Systems Research, 2(1), pp.1-15. (ISSN: 1751-200X).
http://dx.doi.org/10.1504/IJBSR.2008.018117 (Indexado en Scopus).
13. Mendoza, A. y Ventura, J. A., 2008, «Incorporating Quantity Discounts to the EOQ Model with
Transportation Costs”, International Journal of Production Economics, 113(2), pp. 754-765. (ISSN:
0925-5273). http://dx.doi.org/10.1016/j.ijpe.2007.10.010 (Indexado en JCR, Scopus).
Chapters in specialised books
1. Mendoza, A., Ventura, J. A. y Pazhani, S., 2016, “Positioning Automated Guided Vehicles in a General
Guide-Path Layout,” Libro: Progress in Material Handling Research. (ISBN en proceso).
2. Mendoza, A. y Ventura, J. A., 2014, “EOQ Models with Two Modes of Freight Transportation and All-Units
Quantity Discounts”, Handbook of EOQ Inventory Problems: Stochastic and Deterministic Models and
Applications, Volume 197 of the International Series in Operations Research & Management Science,
Springer, pp. 139-153. (ISBN: 978-1-4614-7638-2). http://dx.doi.org/10.1007/978-1-4614-7639-9
(Indexado en Scopus).
3. Trejo-Pech, C. J., Mendoza, A. y Weldon, R. N., 2011, “Inventories, Financial Metrics, Profits, and Stock
Returns in Supply Chain Management”. Libro: “Supply Chain Management”, Editor: Pengzhong Li. INTECH
publishers. (ISBN: 978-953-7619-X-X). http://cdn.intechopen.com/pdfs/15538.pdf
4. Mendoza, A., Ventura, J. A. y Huang, K. L., 2010, “A Flowshop Scheduling Problem with Transportation
Times and Capacity Constraints,” Libro: Progress in Material Handling Research, Editores: K. Ellis, R. De
Koster, B. Montreuil, K. Gue, R. Meller, M.K. Ogle, Material Handling Institute, Charlotte, North Carolina.
(ISBN: 978-1-882780-16-7).
5. Ventura, J. A. y Mendoza, A., 2008, “Inventory Management and Transportation in Supplier Selection
Decisions,” Libro: Progress in Material Handling Research, Editores: K. Ellis, R.D. Meller, M.K. Ogle, B.A.
Peters, G.D. Taylor, J. Usher, Material Handling Institute, Charlotte, North Carolina. (ISBN:
978-1-882780-15-0).
Sent for publication
1. Pazhani, S., Mendoza, A., Nambirajan, R., Narendran, T., Ganesh, K., Olivares-Benitez, Elias, 2018,
“Modelling and Analysis of Multi-Period Closed Loop Supply Chains”. Enviado a Computers and Industrial
Engineering.
2. Urzúa, M., Mendoza, A., González, A., 2018, “Evaluating the impact of order picking strategies on the
order fulfillment time: A simulation study”. Enviado a ARPN Journal of Engineering and Applied Sciences.
3. Ventura, J. A., Golany, B., Mendoza, A., Li Chenxi, 2018, “A Multi-Product Dynamic Supply Chain
Inventory Model Considering Supplier Selection, Joint Replenishment and Transportation Cost”. Enviado a
European Journal of Operational Research.
Articles in process
1. Pazhani, S. y Mendoza, A., “Lagrangian Relaxation for a Multi-Product Closed-Loop Supply Chains”.
2. Pazhani, S. y Mendoza, A., “Performance and Analysis of Multiple Attribute Load Selection Rules for
Multiple-Load Automated Guided Vehicles”.
International congresses articles
1. Urzúa, M., Mendoza, A., González, A. O., 2018, “Improving Order Fulfillment Time: A Simulation Study to
Evaluate Picking Strategies”, Artículo in Extenso en Industrial & Systems Engineering Research Conference
(Institute of Industrial and Systems Engineering), Orlando, Florida, Paper No. 2104. (Indexado en Scopus).
2. Alejo-Reyes, A., Mendoza, A., Olivares-Benitez, E., 2018, “Inventory Replenishment Decisions for the
Supplier Selection Problem Considering Transportation Freight Rates and Quality”, Artículo in Extenso en
Industrial & Systems Engineering Research Conference (Institute of Industrial and Systems Engineering),
Orlando, Florida, Paper No. 1398. (Indexado en Scopus).
3. Alejo-Reyes, A., Mendoza, A., 2017, “Supplier Selection and Replenishment Policies Including
Transportation Freight Rates and Quality”, Artículo in Extenso en VI Congreso de la Sociedad Mexicana de
Investigación de Operaciones, SMIO.
4. Moreno, M.A., Mendoza, A., Rojas, O., 2015, “Cadena de Suministro del Sector Salud en Jalisco,
Realidad y Oportunidades”, Artículo In Extenso en International Congress on Logistics & Supply Chain
(CILOG), Instituto Mexicano del Transporte.
5. Pazhani, S., Ventura, J. A., Mendoza, A., 2014, “Positioning Automated Guided Vehicles in a General
Guide-Path Layout”, Artículo In Extenso en Industrial & Systems Engineering Research Conference
(Institute of Industrial Engineers Annual Conference), Montreal, Canadá, Paper No. 1661. (Indexado en
Scopus).
6. Moreno, M. A., Mendoza, A., 2014, “Hospital Excellence Operation Model”, Artículo en Industrial
Engineering Applied Solutions (Institute of Industrial Engineering Annual Conference), Montreal, Canadá.
(Indexado en Scopus).
7. Mendoza, A., Pazhani, S. y Ventura, J. A., 2013, “Optimizing Inventory Levels in a Serial Supply Chain
considering Multiple Suppliers and Transportation Costs”, Artículo In Extenso en Industrial & Systems
Engineering Research Conference (Institute of Industrial Engineers Annual Conference), Puerto Rico, Paper
No. 231. (Indexado en Scopus).
8. Ventura, J. A., Huang, K-L, y Mendoza, A., 2012, “A Flow Shop Sequencing Problem with Synchronous
Material Transfers”, Artículo in Extenso en Industrial & Systems Engineering Research Conference (Institute
of Industrial Engineers Annual Conference), Orlando, Florida, Paper No. 189. (Indexado en Scopus).
9. Moreno, M. A. y Mendoza, A., 2012, “Hospital Excellence Operation Model: an Approach to Lean
Healthcare in Mexican Hospitals”, Artículo in Extenso en Industrial & Systems Engineering Research
Conference (Institute of Industrial Engineers Annual Conference), Orlando, Florida, Paper No. 532.
(Indexado en Scopus).
10. Mendoza, A., Ventura, J. A. y Rae Cho, S. , 2011, “Production and Distribution Planning in a Supply
Chain Network”, Artículo in Extenso en Industrial & Systems Engineering Research Conference (Institute of
Industrial Engineers Annual Conference), Reno, Nevada, Paper No. 375. (Indexado en Scopus).
11. Moreno, M. y Mendoza, A., 2010, “Demand Visibility in the Fashion Industry”, Artículo en Industrial
Engineering Applied Solutions (Institute of Industrial Engineering Annual Conference), Cancún, México.
(Indexado en Scopus).
12. Mendoza, A. y Ventura, J. A., 2010, “A Serial Inventory System with Supplier Selection and Order Quantity
Allocation”, Artículo in Extenso en Industrial Engineering Research Conference (Institute of Industrial
Engineering Annual Conference), Cancún, México, Paper No. 77. (Indexado en Scopus).
13. Mendoza, A. y Ventura, J. A., 2009, “The Total Cost of Logistics in Supplier Selection Decisions”, Artículo
in Extenso en Industrial Engineering Research Conference (Institute of Industrial Engineering Annual
Conference), Miami, Florida, Paper No. 205.
14. Mendoza, A. y Ventura, J. A., 2008, “Incorporating Transportation Costs into Supplier Selection and Order
Quantity Allocation Decisions”, Artículo in Extenso en Industrial Engineering Research Conference (Institute
of Industrial Engineering Annual Conference), Vancouver, Canadá, Paper No. 525. (Indexado en Scopus).
15. Mendoza, A. y Ventura, J.A., 2006, “An Effective Method to Supplier Selection and Order Quantity
Allocation,” Artículo in Extenso en Industrial Engineering Research Conference (Institute of Industrial
Engineering Annual Conference), Orlando, Florida, Paper No. 1159. (Indexado en Scopus).
16. Mendoza, A. y Ventura, J.A. 2005, “An Inventory Model with Incremental Quantity Discounts and
Transshipment Costs,” Artículo in Extenso en Industrial Engineering Research Conference (Institute of
Industrial Engineering Annual Conference), Atlanta, Georgia, Paper No. 219. (Indexado en Scopus).
17. Mendoza, A. y Ventura, J.A. 2004, “An Inventory Model with Two Transportation Modes and All-Units
Quantity Discounts,” Artículo in Extenso en Industrial Engineering Research Conference (Institute of
Industrial Engineering Annual Conference), Houston, Texas, Paper No. 661. (Indexado en Scopus).
Lectures and keynote speeches
1. Mendoza, A., abril 2015, ponencia titulada: “Educación de Calidad para un Futuro Profesional de Éxito”.
Foro: Fortalecimiento de la Calidad de las Instituciones de Educación Superior Particulares de la Región
Centro Occidente de México (Aguascalientes, Colima, Guanajuato, Jalisco, Michoacán y Nayarit).
2. Mendoza, A., octubre 2015, panelista en 3a. Feria de Universidades AJIEMS.
3. Mendoza, A. y Ventura, J. A., 2014, “Construction of Layouts for Production/Service Facilities”.
Educational Talks. Classroom Day en Modex University, Atlanta, Georgia.
4. Mendoza, A., abril 2011, Conferencia Titulada: “Selección de Proveedores y Determinación de Órdenes
de Pedido”, 4o Coloquio Interdisciplinario de Doctorado, UPAEP.
5. Mendoza, A. y Moreno, M. A., Marzo 2010, Conferencia titulada: “Herramientas Mundiales en PyMES:
Cadenas de Suministro ¿Lean ó Agile?”, Congreso Nacional del Instituto de Ingenieros Industriales (IIE),
Guadalajara, Jalisco.
6. Mendoza, A., Septiembre 2009, Conferencia titulada: “Innovación en la Cadena de Suministro”, Congreso
de Ingeniería Industrial: Creatividad e Innovación, Universidad Vasco de Quiroga, Morelia, Mich.
7. Mendoza, A. y Ventura, J. A., 2006, “A Supplier Selection Model with Quality and Capacity Constraints,”
The Institute for Operations Research and the Management Sciences (INFORMS) Annual Meeting,
Pittsburgh, Pennsylvania.
8. Mendoza, A. y Santiago, E., 2005, “A Multicriteria Approach to the Supplier Selection Problem,”
Presentación en the Enterprise Integration Consortium Industry Advisory Meeting, State College,
Pennsylvania.
Proyectos de Investigación
1. Nucamendi, S., Mendoza, A., Olivares, E., Moreno, M. A., “Modelos y Métodos de Solución para
Problemas de Ruteo de Vehículos”. Proyecto en curso con el apoyo del Fondo “Fomento a la Investigación
UP 2017”. Universidad Panamericana, campus Guadalajara.
2. Red de Sistemas de Transporte y Logística [SiT-LOG]. Entre el Instituto Mexicano del Transporte y
Asociación Mexicana de Logística y Cadena de Suministro.
3. Grupo Internacional de Investigación para el tema “Modelling and Analysis of Closed Supply Chains”. The
Pennsylvania State University, Indian Institute of Technology Madras, Universidad Panamericana.
4. Ventura, J. A., Mendoza, A. y Pazhani, S., 2012 (concluido), ”A Serial Inventory System with Supplier
Selection and Order Quantity Allocation considering Transportation Costs». Universidad Panamericana y
The Pennsylvania State University.
5. Moreno Míguez, M. A. y Mendoza, A., 2011 (concluido), “Marco de Referencia de la Dirección de
Operaciones y la Cadena de Suministro en el Sector Salud”. Recibió fondos de la Convocatoria “Apostar
por el Futuro de México” del Centro Panamericano de Investigación e Innovación.
6. Ventura, J. A., Golany, B. y Mendoza, A., 2010 (concluido), ”Supplier Selection and Inventory
Management in Multi-Stage Production -Distribution Systems». Fondos “Marcus Funds” entre The
Pennsylvania State University e Israel Institute of Technology.
Thesis Supervision
Doctorate:
– Avelina Alejo Reyes (in progress), Doctorate in Engineering, Universidad Panamericana.
Thesis Topic: “Supplier Selection and Replenishment Policies Including Transportation Freight Rates and Quality”.
– Miguel Ángel Moreno Míguez (2014), Doctorate in Logistics and Supply Chain Management, Universidad Popular Autónoma del Estado de Puebla.
Thesis Topic: “Framework for Operations Management and Supply Chain in the Health Sector of Mexico”.
Master’s Degree:
– Juan Martín Orejel Orejel and Emilio Zamorano de Acha (2010), Master’s in Engineering, Universidad Panamericana.
Thesis Topic: “Proposed Heuristic for the Classroom Assignment Problem”.
– Emilio Zamudio Gutiérrez (in progress), Master’s in Sciences, Universidad Panamericana.
Thesis Topic: “Forecasting Methods Using Multi-Criteria Methods”.
Activities of scientific evaluation, editorials and Institutional development
Related to CONACYT
• Member of CONACYT in certified evaluators with the following number:
RCEA-01-20594-2010.
• Evaluator of the National Postgraduates Quality Program (PNPC), 2015 application.
• Evaluator of the Basic Science application (project number 258761), 2015 application.
• Evaluator of the Basic Science application (project number 237957), 2014 application.
• Evaluator of applications of scholarships to study abroad (Application of High level Human Resources Education
in Quality Postgraduate Programs Abroad, CONACYT Scholarships 2009, second period).
Affiliations with Other Institutions
– Research Project Evaluation: Competitiveness and Corporate Sustainability in SMEs. Conducted by the Universidad Autónoma de Aguascalientes through the Department of Research Support (November 2018).
Editorial/Technical Committees
– Member of the Technical Committee for the International Congress on Logistics and Supply Chain (CiLOG) 2018.
– Member of the Editorial Committee for the International Journal of Business Research and Management since 2012.
Institutional Development
– President of the Institutional Research Council at Universidad Panamericana (2016-present).
– Founding Member and President of the Research Commission at Universidad Panamericana, Guadalajara campus (2012-2017).
– Designed a new program in Computer Systems and Graphics Engineering (2014-2015).
– Updated and standardized engineering programs: Industrial, Mechatronics, Innovation and Design, Digital Animation, and Civil Engineering (2013-2015).
– Designed and developed the inter-campus doctoral program in Engineering at Universidad Panamericana (launched August 2013).
– Updated two undergraduate programs in Industrial Engineering and Business Innovation at Universidad Panamericana (2008, 2010).
Scientific Reviews
Technical Reviewer Activities
– Technical Reviewer for the International Congress on Logistics & Supply Chain (CiLOG):
– 2018
– 2017
– 2015
– Reviewer for the following journals:
– Omega, The International Journal of Management Science (2015)
– International Journal of Production Research (2014)
– Journal of Applied Mathematical Modelling
– European Journal of Operational Research
– Operational Research: An International Journal
– Member of the Advisory Board and Technical Reviewer for the International Congress on Logistics & Supply Chain (2013).
– Reviewer for the book: “Supply Chain Engineering: Models and Applications,” Operations Research Series, CRC Press (2012).
– Evaluator of Articles for the Industrial & Systems Engineering Research Conference, from 2004 to present.
These roles highlight a commitment to advancing research in logistics and supply chain management through rigorous peer review and evaluation processes.
Teaching Experience
Universidad Panamericana
– Control and Administration of Inventories: Industrial Engineering and Business Innovation, 2008-present.
– Supply Chain Management and Logistics: Industrial Engineering and Business Innovation, 2009-present.
– Facility Design: Industrial Engineering and Business Innovation, 2010.
– Supply Chain Management: Master’s in Engineering, February-June 2012.
– Inventory Planning and Management Strategies: Master’s in Engineering, August-December 2012.
– Seminar on Supply Chain Management: Conducted at the International Summer Business School promoted by the International Area of Universidad Panamericana, 2008, 2009, 2010.
– Physics Laboratory: Industrial Engineering, January-December 2001.
– Materials Management: Industrial Engineering, January-June 2001.
The Pennsylvania State University
– Teaching Assistant, Master’s in Manufacturing Management, August 2005 – December 2007.
– Teaching Assistant, IE 423: Quality Control (2 semesters), Department of Industrial and Manufacturing Engineering, January-December 2004.
Participation in Other Congresses/Conferences/Courses
– 2016: Seminar Among Peers, Conacyt, San Luis Potosí, SLP.
– 2015: Seminar Among Peers, Conacyt, Mérida, Yucatán.
– 2012: The Effective Exercise of Leadership, Geisel School of Medicine at Dartmouth, Hanover, New Hampshire.
– 2012: International Visibility of Research, Universia and Scimago Lab, Miami, Florida.
– 2011: Language and Literacy Practices Across The Academy Course, DePaul University, Chicago, Illinois.
– 2009: Material Handling Teachers Institute sponsored by College-Industry Council for Material Handling Education, Fayetteville, Arkansas.
– 2008: Teaching Effectiveness Colloquium at the INFORMS Annual Meeting, Washington, DC.
Industry Experience
– Bayer Materialscience, Pittsburgh, Pennsylvania: Developed the SCOR Model in the Operations and Supply Chain area, June-August 2006.
– Onza Deportes, S.A., Guadalajara, Jalisco, Mexico: Independent consultant in process and operations optimization, June 2001 – July 2002.
– Requiez, S.A. de C.V., Guadalajara, Jalisco, Mexico: Consultant on inventory reduction and control and its effect on the company’s supply chain, September – December 2001.
– Damy Cambio de Via, S.A., Guadalajara, Jalisco, Mexico: Consulting in plant engineering, November 1999 – March 2000.
– Manufacturas Tesa, S.A. de C.V., Guadalajara, Jalisco, Mexico: Head of Production Planning for parts manufactured in Mexico, August 1999 – August 2000.
– Universidad Panamericana (Guadalajara Campus): Consultant on the integration of individuals with physical disabilities into the workforce. Project titled “New Labor Generation,” August-December 1998.
– Llaves Altuna de México, S.A. de C.V., Guadalajara, Jalisco, Mexico: Quality Assistant for the implementation of ISO 9000, June 1997 – May 1998.
Scholarships
– Material Handling Education Foundation Scholarship (Ridg-U-Rak Honor Scholarship), 2006-2007.
– CONACYT Scholarship for postgraduate studies, 2002-2007.
Honours and Recognitions
– Graduate of the Last Decade (GOLD) Award, 2017, Penn State Industrial & Manufacturing Engineering Society, The Pennsylvania State University.
– “Manuel López Cotilla” Award, 2016, Exemplary Teacher of Community Engagement, Jalisco Tecnológico (JALTEC).
– Outstanding Professional Award, Institute of Industrial Engineers, 2015.
– Graduated Magna Cum Laude in Industrial Engineering, Universidad Panamericana, 2001.
– Member of the Alpha Pi Mu Honor Society, 2005.